Rust Inhibitor®

How it Works

Dustless Blasting Rust Inhibitor® decreases the water’s surface tension, allowing it to penetrate the pores of the surface and remove contamination, including salts, acids, light oils, and greases.

This also removes byproducts of the blasting process (shattered abrasives, dried paint) lodged within the pores of the surface, allowing for the strongest bond possible between the surface and the coating.

Dustless Blasting Rust Inhibitor® leaves behind no unwanted residue, and evaporates completely, giving you a surface that is clean and primer-ready for up to 72 hours.

View MSDS

How to Use

1.) Blast with Rust Inhibitor Treated Water
Mix with water in a 1:100 ratio. This cleans the metal & prevents it from being embedded with chlorides.

2.) Rinse with Rust Inhibitor Treated Water
After blasting, the metal still needs a final rinse. Use the same ratio as the first step.

3.) Remove Standing Water from the Metal
Use a leaf blower or oil free compressed air to remove any standing water from the metal. 

4.) Avoid Re-Contamination
Dirt, body oil and moisture all cause rust. Be sure to wear clean rubber gloves when handling the metal.

Full Instructions